The latest from the French engineers at LOOK.  The Keo 2 max provides an enhanced cleat / pedal interface offering more contact area for power transmission at a stunningly low weight around 250g.

Check out the real world review

Particular attention was focused on reliability and provided through features such as: a carbon charged injected pedal body, a stainless steel cleat contact area, an oversized axle with dual seals, making this a pedal built to last. The new line of Keo 2 MAX pedals maintains a low cleat contact height even with the use of a steel oversize axle. The pedal is built with two miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing. LOOK axles are only approved once they have survived a million cycles at 100 revolutions per minute with a 90kg (198lbs) load at the centre of the pedal and an eccentric rotation (replicating a bump each revolution). This test largely surpasses current standards (reference NF EN 14781). Dual seals help to increase bearing longevity.

Adjustable Q-factor:

Thanks to 14mm of threads on the new LOOK axle, the Q-factor may be extended by 2mm with the use of specific washers available separately. Use of these specific washers results in a Q-factor of 55mm versus the original 53mm.